[Search] [Contact Us]
Progettazione Elettronica Controlli di Macchine Automatiche  
 USBIO24 
Schede Accessorie
PROGETTAZIONE
Hardware
Firmware uC
Masters PCB
Circuiti Ibridi
Software Custom
Embedded Linux

SOFTWARE

PRODOTTI
Embedded Linux Board
Moduli I/O USB
Moduli I/O Ethernet
Moduli A/D Ethernet

LPC900 Programmer
PRM-W1 Boards
USB Key


Cerca nel sito


Contatti

L'Autore

 Starter Kit 

Schede Accessorie di Espansione per USBIO24R ed EtherIO24R/TCP


I/O Analog Board Scheda Accessoria ADC e DAC
Analog Board
La I/O Analog Board puo' essere connessa ad una porta di I/O del modulo USBIO24 oppure EtherIO24 per dotarli di 8 canali di ingresso A/D e 2 canali di uscita D/A.
1 x 8 Channel 10 bit Analog to Digital Converter (MCP3008)
1 x 12 bit Digital to Analog Converter with 2 Buffered Outputs
Screw Terminal Blocks for Analog Inputs and Outputs
Easy connection by 10-way box header to suit standard IDC connector for connection to the I/O port.
72mm Standard width for DIN Rail Modules

I/O Combo Board Scheda Accessoria Rele' + Optoisolatori
Combo Board
La I/O Combo Board puo' essere connessa ad una porta di I/O del modulo USBIO24 oppure EtherIO24 per dotarli di 4 contatti rele' isolati e 4 ingressi optoisolati.
4 x Form C type Relays Rated at 5A @ 240VAC with a 12V Coil
4 x Opto Insulated Inputs (3-24Vac/dc)
LED indication for relay status and Opto inputs
Screw Terminal Blocks for Relay outputs and Opto inputs
Easy connection by 0.1" pitch 10-way box header to suit standard IDC connectors for connection to the I/O port on the I/O 24 Modules

I/O Relay Board Scheda Accessoria Rele'
Relay Board
La I/O Relay Board puo' essere connessa ad una porta di I/O del modulo USBIO24 oppure EtherIO24 per dotarli di 8 contatti rele' isolati, utilizzabili per una varieta' di carichi.
8 x Form C type Relays Rated at 5A @ 240VAC with a 12V Coil
LED indication for relay status
Screw Terminal Blocks for Relay outputs
Easy connection by 0.1" pitch 10-way box header to suit standard IDC connectors for connection to the I/O port on the I/O 24 Modules

I/O Opto Board Scheda Accessoria Ingressi Optoisolati
Opto Board
La scheda I/O Opto Board puo' essere connessa ad una porta di I/O del modulo USBIO24 oppure EtherIO24 per dotarli di 8 ingressi optoisolati.
8 x Opto Insulated Inputs for each of the I/O24 port pins (3-24Vac/dc)
LED indication for opto status
Screw Terminal Blocks for Opto inputs
Easy connection by 0.1" pitch 10-way box header to suit standard IDC connectors for connection to the I/O port on the I/O 24 Modules

I/O Connector Board Scheda Accessoria Morsettiera/LED
Connector Board
La scheda I/O Connector Board puo' essere connessa ad una porta di I/O del modulo USBIO24 oppure EtherIO24 per dotarli di terminali di connessione a vitecon la funzionalita' opzionale di pull-up o pull-down resistor cosi' come indicazione a LED dello stato dei pin della porta.
LED indication for port status
Option of either using pull up or pull down resistor on the I/O's of the modules
Screw Terminal Blocks
Easy connection by 0.1" pitch 10 way box header to suit standard IDC connectors

I/O ULN2803 Board
Scheda Accessoria Uscite ULN2803
ULN2803
La scheda ULN2803 puo' essere connessa ad una porta di I/O del modulo USBIO24 oppure EtherIO24 per dotarla di uscite che permettano l'uso di piu' alte tensioni e correnti.
1 x ULN2803 High Voltage / High Current Transistor Array
Indication LED’s for channel status
Screw Terminal Blocks for outputs
Easy connection by 10-way box header to suit standard IDC connector for connection to the I/O port.
72mm Standard width for DIN Rail Modules

I/O ULN2075B Board Scheda Accessoria Uscite ULN2075B
ULN2065B
La scheda ULN2075B puo' essere connessa ad una porta di I/O del modulo USBIO24 oppure EtherIO24 per dotarla di uscite che permettano l'uso di piu' alte tensioni e correnti.
2 x ULN2065B (80V 1.5A Quad Darlington switches)
Indication LED’s for channel status
Screw Terminal Blocks for outputs
Easy connection by 10-way box header to suit standard IDC connector for connection to the I/O port.
72mm Standard width for DIN Rail Modules

I/O Switch Board Scheda Accessoria Interruttori/Pulsanti
Switch Board
La scheda I/O Switch Board puo' essere connessa ad una porta di I/O del modulo USBIO24 oppure EtherIO24 per dotarli di 8 interruttori e/o pulsanti con indicazione a LED dello stato dei pin di I/O della porta.
8 Tact Push Button switches & 8 Slide switches
LED indication of I/O status
Easy connection by 0.1" pitch 10 way box header to suit standard IDC connectors

Voltage Translator Board Scheda Accessoria conversione 5V ~ 3.3V
Voltage Translator Board
The Voltage Translator Board is an accessory board that performs level conversion of a 5V interface (I/O24 or microcontroller) to a 3V3 or lower interface. This board can be connected to a single port on Elexol’s IO24 Controller Range.
2 X 74LVC4245 Bus Transceivers for voltage translation
2 x I/O ports matching configuration of I/O 24
Selectable jumper pins for the direction of voltage translation
Onboard Voltage Regulator to supply the 3V3 side
Easy connection to the I/O port via a 10-way box header that suits a standard IDC connector
72mm standard width for DIN Rail Mounting Modules

Port Status Board
Scheda Accessoria di indicazione stato porta
Switch Board
The Port Status Board is an accessory board that allows visual indication as well as offering test points to the I/O pins of a single port on Elexol’s IO24 Controller Range.
The board consists of 8 buffered LED indicators that provide a visual indication of the current state on the port.
There are also two 10-way box headers so that it can be connected in-line without inhibiting the function of the current port. The connection between the IO24 module and the Port Status Board is via a 30 cm IDC connection cable. This cable is provided with the board.
The board has been designed to a 72mm standard width so that it can easily be mounted in DIN rail mounting modules.

I/O 50Pin Board Scheda Accessoria di connessione IDC 50 pin

La scheda I/O 50Pin Board puo' essere connessa alle porte di I/O del modulo USBIO24 per trasformarle in un unico modulo di connessione 50 pin IDC, per esigenze industriali.
Easy connection by 0.1" pitch 10 way box header to suit standard IDC connectors

Insieme ad ogni scheda accessoria viene fornito un cavetto di 30cm per la connessione al modulo USBIO24.
[Listino Prezzi Prodotti ELEXOL]

PRECMA S.r.l.
Schede Accessorie
 Starter Kit 


Site made with Sworg - Simple Web Organizer
©Copyright 1998-Today PRECMA S.r.l.
All Rights Reserved - Copyright Notice